سختی سنج POLDI ساخت چک
سختیسنج ضربهای POLDI مطابق با استاندارد ČSN 25 0290 یک ابزار ساده، قابلحمل و اقتصادی برای اندازهگیری سختی برینل (HB) و تعیین استحکام کششی فلزات است. این دستگاه بهویژه در شرایط صنعتی و میدانی که استفاده از دستگاههای بزرگتر امکانپذیر نیست، کاربرد فراوانی دارد.
مشخصات فنی کلیدی
-
روش آزمون: یک گوی فولادی سختشده به قطر 10 میلیمتر بین نمونه مورد آزمایش و میله مرجع کالیبرهشده قرار میگیرد. با وارد کردن یک ضربه چکشی، فرورفتگیهایی در هر دو ایجاد میشود. قطر این فرورفتگیها با ذرهبین مخصوص اندازهگیری شده و با استفاده از جداول مرجع، سختی برینل و استحکام کششی ماده تعیین میشود.
-
محدوده استحکام کششی قابل اندازهگیری: از 300 تا 2200 نیوتن بر میلیمتر مربع.
-
دقت اندازهگیری:
-
برای فولاد با استحکام 50–100 kg/mm²: حداکثر ±3٪.
-
برای فولاد با استحکام 100–150 kg/mm²: حداکثر ±5٪.
-
برای استحکام بالاتر از 150 kg/mm²: ممکن است خطا کمی بیشتر باشد.
-
-
محدودیتهای مواد: قابل استفاده برای انواع آهن و فولاد قابل آهنگری، بهجز فولادهای آستنیتی مانند فولادهای با 25٪ نیکل، 14٪ منگنز، فولادهای ضدزنگ کروم-نیکل و فولادهای غیرمغناطیسی.
-
عمر میله مرجع: هر میله مرجع کالیبرهشده برای حدود 40 آزمایش قابل استفاده است.
اقلام همراه دستگاه
-
میله مرجع کالیبرهشده.
-
ذرهبین اندازهگیری با بزرگنمایی 10 برابر.
-
جدول مقایسه سختی و استحکام کششی.
-
جعبه حمل مقاوم (معمولاً از چوب).
کاربردها
این دستگاه برای اندازهگیری سختی و استحکام کششی در مواد زیر مناسب است:
-
فولادهای ساختمانی و ابزار.
-
قالبها و قطعات آهنگریشده.
-
مواد ریلی، تیرآهنها، ورقها و لولهها.
-
ریختهگریهای فولادی، برنز، آلومینیوم، مس، برنج، چدن خاکستری و چدن سخت.
POLDI Pocket Hardness Tester
Type : Brinell
Mounting: portable
Product applications: metal, for aluminum, copper, for steel
Other characteristics: mechanical
Poldi Hardness Tester Standard Kit Includes: Hardness Tester, steel piece for approximately 40 measurements, magnifier, hardness table, carrying case
The Poldi hardness tester is the simplest and most economical device for measuring hardness according to Brinell and determining tensile strength of engineered and tool steels, dies, forgings, railway material, beams, sheets, pipes, cast steel and various parts of steel, as well as determining hardness according to Brinell for cast bronze, aluminum, brass, copper, grey and chilled cast iron.
The Poldi hardness tester allows the user to perform the impact test with the help of a hammer almost anywhere including: workshops, at assembly sites or any other places. Brinell hardness and tensile strength can be seen in commonly available conversion tables.
When the POLDI hardness tester uses the check test piece made of steel having the strength of 70 kg/mm2, the deviation of the tensile strength converted from the Brinell hardness compared to the real tensile strength in steel having the strength of 50-100 kg/mm2 is maximum ± 3 %. In case of milder types of iron and steel and steel having the strength of 100-150 kg/mm2 (e.g. with hardened, heat treated and high alloyed steels) it is a maximum of ± 5 %. With the strength of 150 – 200 kg/mm2, inaccuracy under certain conditions can be even a little higher.